Gasification Maintenance Machinery Engineer

职位性质：	全职	专业要求：	不限	招聘日期：	2024.8.16 ～ 2024.12.31
工作地点：	山西-长治市	外语要求：	英语一般	更新日期：	2024.9.18
工作经验：	五年以上	职称要求：	无职称
学历要求：	大专	工资待遇：	13000 - 16000
招聘人数：	1人

PRINCIPAL ACCOUNTABILITIES 1. Ensure to comply with JVCo and local safety, health and environment standard, fulfill the mandatory safety requirement and activities: safety training, safety meeting, Basic Safety Practices and all other requirements by JVCo EH&S and local regulation. 2. Monitor the serviceability of plant equipment and facilities and ensure they adhere to safety, housekeeping and environmental requirements. 3. Responsible for the maintenance of all pressure vessels, tanks, relief valves, exchangers, pipe line, flare detections, life support system, critical safety system and all types of rotating equipment (Pumps, turbines and compressors, Coal Millersetc) and other mechanical system. 4. Support in inspection planning, code design, regulatory compliance, quality control standard, equipment repair, and fitness for service. 5. Support to develop Inspection Planning and Repair Procedures. 6. Interpretation of corporate standards as well as “recognized and generally accepted good engineering practices” such as ASME and GB Codes and API Documents to site. 7. Performing equipment design, inspection, fitness for service evaluations and failure analysis for mechanical integrity system Development and updating of corporate standards 8. Implement and manage engineering requirements to satisfy equipment selection, maintenance and reliability initiatives 9. Inspect Pressure Systems (including Pressure Vessels, Heat Exchangers, Fired Heaters, Reformers, Storage Tanks, furnace, Piping) during plant outages / normal operation and evaluate results for recommend repair, Input for development and maintenance of Pressure System standards, procedures, best practices, inspection contracts and contractor service. 10. Response to maintenance requirements that could be scheduled or unscheduled/emergency jobs, on 24/7 base, prompt response to requests for assistance and putting in the time and effort to meet our customer’s expectations. 11. To be familiar with all equipment in Gasification Facility, maintain all mechanical equipment accurate documents integrity and equipment history database reachable. 12. Provide hand-on technical skills at the troubleshooting and all related maintenance work or supporting work responsible. 13. Perform preventive maintenance work and support to implement Mechanical Integrity work and tasks, troubleshooting, repair for all responsibly equipment. 14. Coordinate or assist of supervision the contractor’s work in the facility or shop to guarantee safety and quality and reliability. 15. Continually to drive productivity and cost savings and enhancement through improved work process and equipment performance. Initiate and Implement continuous improvement saving projects. 16. Reporting-Time entry weekly, and prepare technical reports either written or through entries into the resource management system to maintain accurate documentations on the Gasification facility, and to provide information for others in the organization to carry out their responsibilities effectively. 17. Provide mechanical system diagnostics services in troubleshooting and resolving machinery issues using vibration diagnostics tools and failure analysis techniques. This includes issuing failure analysis reports and cost effective recommendations for reliability improvements. 18. Develop mechanical equipment job-packs for major overhauls and repair. 19. Initiate and implement reliability and/or efficiency improvement initiatives and best practices on operating machinery and focus on CoNC(cost of non-compliance) 20. Provide installation and commission support for new large machinery [eg. Compressors, turbines.] 21. Participate in the planning and execution of minor and major shutdowns. Provide technical and hands on support as required during shutdowns. 22. Spare parts inventory review and parts purchasing support technically, effort in plant reliability improvement. 23. Keep abreast of and evaluate new methodologies, work practices, for application and use within the plant. 24. Assist in the development, implementation, and periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve Gasification Facility on stream capability. JOB REQUIREMENTS Be honest and responsible Educational: Diploma or higher education holder in Mechanical/Machinery Engineering. Working Experience: The minimum requirements for the machinery/mechanical engineer’s position are 5+ years’ experience in Pulverization Coal Gasification Facility mechanical maintenance experiences, especially 3+ years’ experience in Shell Gasification Facility mechanical maintenance experiences. Desirable to have Piping stress analysis experience. The engineer should be familiar with basic math, precision measuring, and materials of mechanical. Possess good oral and written communication skills, preferable with English language. Able to work independently as well as in a team player. Basic office softwar

About Air
Products

Air Products (NYSE:APD) is a world-leading industrial
gases company in operation for nearly 80 years. Focused on serving energy,
environment and emerging markets, the Company provides essential industrial
gases, related equipment and applications expertise to customers in dozens of
industries, including refining, chemical, metals, electronics, manufacturing,
and food and beverage. Air Products is also the global leader in the supply of
liquefied natural gas process technology and equipment. The Company develops,
engineers, builds, owns and operates some of the world's largest industrial gas
projects, including gasification projects that sustainably convert abundant
natural resources into syngas for the production of high-value power, fuels and
chemicals.

The Company had fiscal 2019 sales of $8.9 billion from operations in 50
countries and has a current market capitalization of about $50 billion. More
than 17,000 passionate, talented and committed employees from diverse
backgrounds are driven by Air Products’ higher purpose to create innovative
solutions that benefit the environment, enhance sustainability and address the
challenges facing customers, communities, and the world. For more information,
visit www.airproducts.com.



关于空气产品公司

空气产品公司（Air Products,纽约证券交易所代码：APD）是一家世界领先的工业气体公司，拥有近80年的历史。公司专注于服务能源、环境和新兴市场，为包括炼油、化工、金属、电子、加工制造和食品饮料等众多产业的客户提供生产所必需的工业气体、相关设备和应用专业技术。空气产品公司也是一家全球领先的液化天然气工艺技术和设备供应商。公司同时还开发、设计、建造、拥有并运营着一些全球最大型的工业气体项目，包括气化项目。这些气化项目以可持续的方式将丰富的自然资源转换成合成气，用于生产高附加值电力、燃料和化学品。



2019财年，公司在50个国家和地区的运营销售额达89亿美元，当前市值约500亿美元。其全球来自不同背景的1万7千多名充满热情、富有才华和忠诚敬业的员工在空气产品公司更高目标的引领下，致力于创造创新的解决方案，助力环境改善，增强可持续发展，并解决客户、社区及全球所面临的挑战。欲获得更多信息，请登陆公司中文网站：www.airproducts.com.cn或关注“空气产品公司”中国区官方微信。